1·Rear shaft option for mounting of other devices.
对其他设备安装后轴选项。
2·Combined with the analyses of front and rear shaft, each wheel's braking torque and automobile's braking stability is analyzed when the automobile brakes.
然后，根据差速器的转矩分配特性，讨论在不同附着系数的路面上，采用互逆式中央制动器时可以分配到前后轴每个车轮的制动力矩。
3·A comparison of the two drive modes, namely, the front and rear shaft drives, has led to the conclusion that a front shaft drive is more rational for use on industrial boiler chain grates.
最后，对前、后轴两种驱动方式进行了比较，工业锅炉链条炉排采用前轴驱动方式更为合理。
4·Drive shaft a drive shaft and universal joints connect the transmission to the rear drive axle on most rear-wheel-drive vehicles.
传动轴在大多数后轮驱动的车辆中主要是靠传动轴和万向节连结着变速箱与后轮驱动桥。
5·Rear drive shaft shortened.
后传动轴截短。
6·Remove cardan shaft from rear axle differential and tie it up.
从后轴差速器上拆下万向节轴并将其绑紧。
7·Rotary motion of the transmission main shaft carries through the propeller shaft to the differential, causing the rear wheels to rotate.
变速器主轴的旋转运动通过传动轴传递到差速器上，使后车轮转动。
8·The wheel shaft is connected at the lower side of the rear end of the car body, and can swing and move front and back.
与主动后轮同一轮轴的从动后轮，其可呈空转状态，该轮轴并连接于底盘后端下方，而可前、后幌动移动；
9·The reason the propeller shaft shortens as the Angle increases is that the rear axle and differential move in a shorter ARC than the propeller shaft.
当角度增加时，传动轴变短的原因是后桥和差速器运动的弧度小于传动轴运动的弧度。
10·This accommodates any effective change of length of the propeller shaft as the rear axles move toward or away from the CAR frame.
当后桥在车架上向前或向上运动时，这种结构足以调整传动轴长度的任何变化。